生物质源多孔碳制备及其对废水中药物吸附研究进展

城市现代化与工业化的快速发展给环境造成的污染日趋严重，尤其以水体污染最为明显。近年来，工业废水中药物的含量逐年上升，污染程度已经不容忽视。因此，开发新型多孔材料用于废水中药物分子的吸附分离，已经成为了当前的研究热点。综述了近年来生物质源多孔碳（生物炭）在废水中污染物吸附分离方面的研究，首先简单介绍了废水中污染物的治理方法，在此基础上重点探讨了生物炭的制备与修饰，并结合碳材料表面化学性质与孔道结构，总结并展望了生物炭对药物的吸附性能。     

Digital self-control interventions for distracting media multitasking - A systematic review

Digital distractions can interfere with goal attainment and lead to undesirable habits that are hard to get red rid of. Various digital self-control interventions promise support to alleviate the negative impact of digital distractions. These interventions use different approaches, such as the blocking of apps and websites, goal setting, or visualizations of device usage statistics. While many apps and browser extensions make use of these features, little is known about their effectiveness. This systematic review synthesizes the current research to provide insights into the effectiveness of the different kinds of interventions. From a search of the ‘ACM’, ‘Springer Link’, ‘Web of Science’, ’IEEE Xplore’ and ‘Pubmed’ databases, we identified 28 digital self-control interventions. We categorized these interventions according to their features and their outcomes. The interventions showed varying degrees of effectiveness, and especially interventions that relied purely on increasing the participants' awareness were barely effective. For those interventions that sanctioned the use of distractions, the current literature indicates that the sanctions have to be sufficiently difficult to overcome, as they will otherwise be quickly dismissed. The overall confidence in the results is low, with small sample sizes, short study duration, and unclear study contexts. From these insights, we highlight research gaps and close with suggestions for future research.     

Factors involved in associations between Facebook use and college adjustment: Social competence,perceived usefulness,and use patterns

Although previous research has investigated widespread use of social media, especially Facebook, by youth attending college, the conditions under which these media foster adjustment to college remain unclear. This study tested a model illuminating pathways linking social competence to college adjustment via students’ perceptions about the usefulness of Facebook and ways in which they used the medium. Self-report survey data from 321 college students (M age = 20.09; 58% female; 84% Caucasian) attending a major Midwestern university supported the proposed model, indicating that higher social competence could foster or impede college adjustment, depending upon how it was related to beliefs about the usefulness of different Facebook functions and how these perceptions, in turn, were associated with patterns of Facebook use. Findings underscore the importance of considering connections among personal attributes, perception of media effectiveness, and media behaviors in assessing the implications of social media for users’ psychosocial well-being.     

Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP

Processing lithium-ion battery (LIB) electrode dispersions with water as the solvent during primary drying offers many advantages over N-methylpyrrolidone (NMP). An in-depth analysis of the comparative drying costs of LIB electrodes is discussed for both NMP- and water-based dispersion processing in terms of battery pack $/kWh. Electrode coating manufacturing and capital equipment cost savings are compared for water vs. conventional NMP organic solvent processing. A major finding of this work is that the total electrode manufacturing costs, whether water- or NMP-based, contribute about 8–9% of the total pack cost. However, it was found that up to a 2?×?reduction in electrode processing (drying and solvent recovery) cost can be expected along with a $3–6?M savings in associated plant capital equipment (for a plant producing 100,000 10-kWh Plug-in Hybrid Electric Vehicle (PHEV) batteries) using water as the electrode solvent. This paper shows a different perspective in that the most important benefits of aqueous electrode processing actually revolve around capital equipment savings and environmental stewardship and not processing cost savings.     

Soret and Dufour effects between two rectangular plane walls with heat source/sink

This study addresses the thermo‐diffusion and the diffusion‐thermo phenomena in a semi‐infinite absorbent channel whose walls are contracting/expanding, with heat source/sink effects. The governing partial differential equations with suitable boundary conditions are transformed to a system of dimensionless ordinary differential equations. An analytic solution of the problem has been found using a technique called homotopy analysis method (HAM). HAM gives consistently valid answers to the problem over an extensive variety of parameters and also provides better accuracy. To validate the analytical results, a comparison has been presented with a numerical solution calculated by using the parallel shooting method. The effects of dimensionless parameters, that is, deformation parameter, Reynolds number, Soret and Dufour numbers, and heat source/sink parameter on the expressions of velocity, temperature, and concentration profiles are analyzed graphically to understand the physics of the deformable channel. It has been noted that the velocity across the channel is higher for the expanding channel, as compared to that for the contracting channel. Also the Soret and Dufour number increases the temperature of the fluid, and decreases the concentration. The temperature profile has an increasing behavior in the case of heat source, and a decreasing behavior in the case of heat sink.     

Why do people purchase virtual goods? A uses and gratification (U&G) theory perspective

Few literature studies have investigated the relationships between different uses and gratifications (U&Gs) of mobile instant messaging (MIM) apps, continuation, and purchase intentions. To address this gap, the researchers aimed to examine the influence of the content, social, process, and technology U&Gs of MIM on continuation intentions toward MIMs, and purchase intentions toward virtual goods available on MIMs. A comprehensive research model was developed based on the U&G theory, which was tested using cross-sectional data from 309 Japanese MIM users. The study considered six different U&Gs of MIM as independent variables and purchase intentions towards stickers and continuation intentions towards MIM as dependent variables. The study results suggest that exposure U&G has a significant positive association with MIM sticker purchase intentions. The entertainment and affection U&G are positively associated with continuation intentions towards MIM use. The study contributes to the literature by investigating U&Gs that motivate MIM users to have both positive purchase intentions toward virtual goods, such as stickers, and continuation intentions toward MIMs. The study has significant theoretical and practical implications for both researchers and practitioners who are interested in virtual goods, the virtual economy, MIM apps, social media, new media, and the service economy.     

硅渣和玻璃粉直接烧结制备多孔材料的气孔结构与力学性能

以硅渣和玻璃粉为原料,采用粉体直接烧结法制备多孔材料,研究了烧结温度(700~900℃)、烧结时间(15~120min)和升温速率(10~100℃·min^-1)对多孔材料表观密度、气孔率、物相组成、抗压强度的影响。结果表明:气孔结构均匀性随烧结温度的升高而降低;表观密度随烧结温度的升高先减小后增大,随保温时间的延长而增大,随升温速率的增大而减小,气孔率的变化趋势与表观密度的相反;多孔材料的主要物相为玻璃相和硅、SiC、SiO2、Ca2Al2SiO7等结晶相,且结晶度随烧结温度的升高而降低;抗压强度随烧结温度的升高呈先增大后减小的趋势;当烧结温度为750℃,升温速率为30℃·min^-1,烧结时间为30 min时,多孔材料的主晶相为硅和Ca2Al2SiO7,抗压强度最大(1.60MPa),表观密度为0.43g·cm^-3,气孔率为80%。